Table of Contents
Introduction
A drill is an essential tool used for repair and maintenance jobs around the home or at a construction site; its primary function is to bore holes into hard materials. Drills can either be powered by electricity or battery. The battery-powered drill is called the cordless drill while the electrically powered drill is called a corded drill. Over time, there has been a controversy on the efficiency of the corded and corded drills. Some say corded drills are better while others are against that notion. To know more about corded drills, check out What is a Corded Drill?.
What Is A Corded Drill Used For?
The corded drill, just like any drill, is used to bore holes into walls or construction materials. It is powered directly from an electrical outlet. It makes use of a long power cable, usually about 10 ft, which needs to be plugged to a socket before it can operate. Its mode of operation is quite easy to understand.
There’s a trigger switch conveniently located on the drill that turns on the motor and causes the chuck bit to rotate. The rotating chuck is the part where the drill is fixed, and it can be used with other accessories like a screwdriver bit. This improves the versatility of the tool, allowing to perform other functions like screw-driving, grinding, sanding and any other functions.
Features of A Corded Drill
The Corded drill has different parts that enhance its efficiency and gives the user complete control over the tool. Having a basic knowledge of the major parts of this tool gives you a better understanding of its use and function. The main features of a corded drill are listed below:
Handle
The handle is the part of the drill that allows you to control and manoeuvre the drill. Most drills come with two handles, one of which is the front handle. The front handle provides support when using the tool. It gives you a better grip on the tool and enhances its flexibility. On the other handle, there is the on and off switch, speed adjustment dial and switch lock. This handle gives you full control over the tool, and it is where the power cable is attached.
Trigger Switch
The trigger switch is located on the handle, and it is used to switch the tool on and off. It features a variable speed dial that allows you to control the speed at which the drill works. This means the more you press down or squeeze the trigger, the faster it operates. The speed of a corded drill is measured in revolutions per minute (RPM), and it can be adjusted depending on the material it is being used on. The trigger switch usually comes with a switch lock that keeps the switch in an off or on position.
Chuck
This is the part of the drill that accommodates the drill bit and other accessories. It is located at the tip of the machine and has metal prongs that tighten the screwdriver or drill bit. The chuck can be rotated clockwise or anticlockwise to open or close it.
Motor
This is the most important part of the drill; the other parts completely depend on the motor. There are two types of motor; the brushed and brushless motor. Brushless motor provides greater power and has a longer runtime, but it is expensive. The brushed motor, on the other hand, is less expensive and produces a lot of power.
Why You Should Use A Corded Drill
There are several reasons why the corded drill is the ideal tool for both professional contractors and DIYers. Some of these benefits are listed below
High Speed
The corded drills work at very high speed because they have higher torque than the cordless drills. This makes them suitable for drilling as well as mixing or sanding. This, in turn, saves time and energy.
Power
The corded drill is known to produce a large amount of power. Unlike the cordless drill, it never runs out of power because it is connected directly to an uninterrupted power supply. You don’t have to charge batteries beforehand or check the power gauge; it is a ready-to-go tool that can be used anywhere.
Ergonomic
The cordless drill is incredibly lightweight and easy to handle. It is designed to be compact and comfortable. It can be used for a long time, with little to no pain or hand fatigue.
Conclusion
If you are looking for a more comfortable way to boreholes or drive screws into your wall, the corded drill is your best bet. It is reliable, lightweight and produces an incredible amount of power.